[meteorite-list] Polishing Chondrite Slices

From: Mike Bandli <fuzzfoot_at_meteoritecentral.com>
Date: Wed, 2 May 2007 19:49:22 -0700
Message-ID: <20070503024927.B1C6210548_at_mailwash5.pair.com>

Assuming you mean Ghubara :) First, I should mention that I am new to
cutting and polishing, so you can take what I have to say with a grain of
salt. I did my research, however, and have had monumental success with the
unit I purchased. If you are planning to lap lots of slices now and in to
the future I would recommend a Covington Maxi Diamond Lap. I absolutely love
mine. It has quick changing heads and no arbor hole. TONS of work space. You
can mount up to a 10" heads/discs on it, but the 8" heads it came with are
plenty big for my slices. I start with 220 grit and end at 1220. This
assuming you have a good blade to cut in the first place and no deep saw
marks are left behind. This machine is a bit of an investment, but worth
many years of use. If you are interested, I can put you in touch with
someone that sells them for just a little over cost.

The Inland is cheap, but you have a tiny work space and the heads take much
longer to change. The Inland doesn't look like a machine that will last
years and years either. The Covington is cast aluminum and built like a
tank... and damn it's fast.

Kind regards,
?
Mike Bandli
www.Astro-Artifacts.com
?


-----Original Message-----
From: meteorite-list-bounces at meteoritecentral.com
[mailto:meteorite-list-bounces at meteoritecentral.com] On Behalf Of David &
Kitt Deyarmin
Sent: Wednesday, May 02, 2007 8:19 PM
To: meteorite-list at meteoritecentral.com
Subject: [meteorite-list] Polishing Chondrite Slices

I just bought a Ghubaro and plan to have part of it made into a sphere,
obviously ;), and the rest will be cut into slices

I would like to polish the slices and was wondering if anyone has any
experience doing this.

I have a variety of belt sanders and palm sanders but I don't know what kind

of abrasive to use, is there a specific type for polishing "stone like"
material?

Of do I have to buy a machine like this one:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=020&sspagename=STRK%3AMEWA%
3AIT&viewitem=&item=300107079366&rd=1&rd=1

Any help would be appreciated.

______________________________________________
Meteorite-list mailing list
Meteorite-list at meteoritecentral.com
http://six.pairlist.net/mailman/listinfo/meteorite-list
Received on Wed 02 May 2007 10:49:22 PM PDT