[meteorite-list] Water cutting question

From: Pete Pete <rsvp321_at_meteoritecentral.com>
Date: Tue, 20 Nov 2012 16:47:45 -0500
Message-ID: <BAY153-W457B1061DC8C544A4C48CAF8550_at_phx.gbl>

I do!

I fill all my old distilled four litre jugs with tap water and let them sit with the caps off for about seven days.
A chemist buddy of mine said it takes about 24 hours for any chlorine and other gasses to dissipate, but with the narrow neck and relatively small cap opening, to be prudent, after a couple of days I give it each jug a shake and leave it again for a few more.

Cheers,
Pete
 
> From: mikestang at gmail.com
> Date: Tue, 20 Nov 2012 11:17:37 -0800
> To: raremeteorites at yahoo.com
> CC: meteorite-list at meteoritecentral.com
> Subject: Re: [meteorite-list] Water cutting question
>
> Adam, Mike, Carl, and list:
>
>
> The main constituents in "pure" water that cause corrosion are
> dissolved gasses. Does anyone de-gas their cutting water?
>
> Michael in so. Cal.
>
> On Tue, Nov 20, 2012 at 10:43 AM, Adam Hupe <raremeteorites at yahoo.com> wrote:
> >
> >
> > Who knows what chemicals lurk in tap water? By purifying it, you are removing the unknowns. I have
> > seen, for lack of a better term, Lawrencite disease creep up, especially with tap water that contains chlorine which seems to accelerate the
> > problem. I have had no issues cutting with purified water as long as
> > the contact time has been minimized. I guess purifying it could make
> > the water more acidic but I also monitor the PH level and have not seen
> > much of a difference.
> >
> > Other alternative coolants such as mineral oil, pure ethyl alcohol or
> > kerosine do not appeal to me anymore, mainly due to fumes, ignition or
> > the smell left in the specimens.
> >
> >
> > Adam
> >
> >
> >
> >
> > ________________________________
> > From: Carl Agee <agee at unm.edu>
> > To: meteoritelist meteoritelist <meteorite-list at meteoritecentral.com>
> > Sent: Tuesday, November 20, 2012 9:35 AM
> > Subject: [meteorite-list] Water cutting question
> >
> > I have been following the thread on cutting irons in water. My
> > question is, why distilled or purified water rather than tap water? I
> > was under the impression that purified water, i.e. ultrapure water, is
> > much more corrosive than mineralized water like spring water or tap
> > water. In fact, ultrapure water is so corrosive it is often used in
> > clean labs as a cleaning medium for surfaces. Also, the pharmaceutical
> > industry no longer uses stainless steel tubing for ultrapure water
> > because of corrosion -- they use Teflon or polyethylene instead I
> > believe. Wouldn't pure water be worse on iron oxidation than
> > "mineral" water? I can understand using pure water to cut down on
> > trace element contamination for geochemical srtudies, especially on
> > stones, but I don't see how this helps for keeping irons from rusting.
> > Also, while we are at it, what is the best blade for cutting irons?
> >
> > Thanks,
> >
> > Carl Agee
> > --
> > Carl B. Agee
> > Director and Curator, Institute of Meteoritics
> > Professor, Earth and Planetary Sciences
> > MSC03 2050
> > University of New Mexico
> > Albuquerque NM 87131-1126
> >
> > Tel: (505) 750-7172
> > Fax: (505) 277-3577
> > Email: agee at unm.edu
> > http://meteorite.unm.edu/people/carl_agee/
> > ______________________________________________
> >
> > Visit the Archives at http://www.meteorite-list-archives.com
> > Meteorite-list mailing list
> > Meteorite-list at meteoritecentral.com
> > http://six.pairlist.net/mailman/listinfo/meteorite-list
> > ______________________________________________
> >
> > Visit the Archives at http://www.meteorite-list-archives.com
> > Meteorite-list mailing list
> > Meteorite-list at meteoritecentral.com
> > http://six.pairlist.net/mailman/listinfo/meteorite-list
> ______________________________________________
>
> Visit the Archives at http://www.meteorite-list-archives.com
> Meteorite-list mailing list
> Meteorite-list at meteoritecentral.com
> http://six.pairlist.net/mailman/listinfo/meteorite-list
Received on Tue 20 Nov 2012 04:47:45 PM PST